T-SET is an instant DHW production module that uses a brazed stainless steel plate heat exchanger.
The adjustment of the domestic hot water temperature is done via a thermostat mixing valve, a method that make adjustment easier, facilitates installation and makes the T-SET cheaper than the electronic version.
Including all the components required for its operation, the T-SET is a practical “plug and play” solution which is easy and economical to use.
T-SET is available in two versions (T-SET 20 and T-SET 30), which have different DHW nominal flow rates: 20 l/min and 30 l/min which varies depending on the operating conditions
From 2 l/min to 360 l/min with cascaded modules installed
Casing in thermoformed, closed-cell, polyethylene foam
T-SET offers a variety of important advantages which make it an all-round product for the transfer of heat and highly innovative, efficient and top-quality instant DHW production.
The main added benefits of the new T-SET are:
|SET fresh water station
|Fiorini PFB water storage tank
|3 Safety group
|4 Solar panel
|5 Thermal solar return
|6 Additional heating source
|7 DHW recirculation pump
|8 Cold water bacteriostatic filter
T-SET can be supplemented with three accessories that are useful for managing recirculation, a function which allows the user to obtain hot water from the tap without wasting cold water.
|Consisting of circulator, valves and instructions.
|Recirculation control unit
|Consisting of an electronic board and two PT1000 probes, one contact and one immersion
|With contact for the recirculation loop.